ZED Link Capture Card

LiDAR.Sensors
메인으로 이동
StereoLabs

ZED Link Capture Card

High performance GMSL2 capture card for a up to four ZED X camera on all Jetson Orin and Xavier models.
Product Code : ZED Link Capture Card

Detail View

Product Features
  • High performance capture card for Jetson.
  • Supports hardware synchronization between capture cards at the shutter level  as well as an external trigger/strobe.
  • Requires external 12-19V power supply.
  • View Cable Guide

    Mono
  • Duo
  • Quad

  • Mono
  • Capture 1x GMSL2 camera input in SD/HD/4K up to 4K@30.
  • Up to 6Gb/s total bandwidth.
  • Connects to the CSI port of the carrier board through a 22pin 0.5mm pitch connector.
  • Includes JST to jack connector and CSI cable.

    Duo
  • Capture 2 x GMSL2 camera input in SD/HD/4K up to 4K@30.
  • Up to 10Gb/s total bandwidth.
  • Connects to the CSI port of the Orin/Xavier Developer Kit.
  • Includes a 0.3m (0.98ft) 1-to-4 GMSL2 cable.

    Quad
  • Capture 4 x GMSL2 camera input in SD/HD/4K up to 4K@30.
  • Up to 40Gb/s total bandwidth.
  • Connects to the SAMTEC CSI port of Jetson Orin/Xavier AGX.
  • Includes two 0.3m (0.98ft) 1-to-4 GMSL2 M-F cables.

What's in the Box

For ZED Link Mono:

  • 1x GMSL2 Capture Card Mono
  • 1x JST to jack connector
  • 1x CSI 22pin 0.5mm FFC cable (OP)

For ZED Link Duo:

  • 1x GMSL2 Capture Card Duo
  • 1x GMSL2 1-to-4 M-F cable 0.5m

For ZED Link Quad:

  • 1x GMSL2 Capture Card Quad
  • 2x GMSL2 1-to-4 M-F cable 0.5m
  • 1x JST to jack connector
목록